|
Airsoft DIY: Sealed Bore Cylinder |
|
|
|
|
Written by Malloski
|
|
DIY Sealed Bore
The Cylinder Mod is a cost-saving upgrade that increases air volume.
The stock brass cylinder has a hole that some say is essential for
cylinder to bore matching however, real-world tests shows that
upgrading to a sealed bore type is beneficial for aeg's with longer
barrels. Here is a good DIY article on how to make your own sealed
bore, This upgrade will be helpful especially if you are upgrading to a
longer barrel (ak47 length)
Tada!
This MOD has been proven 100% effective in m4-type AEGS and long-barrel configurations.
Cheers!
|
Airsoft Articles 
